(Effective from 1 October 2010. Details are subject to change.)
| |
| Permit plans |
Ready to submit to local council with supporting documentation based on information provided by client (excludes resource consent/surveying/geotech reports)
Latitude Homes construction & delivery signage
Signage
|
| Construction method |
Based on maximum of high wind zone and durability Zone 1. |
| Stage One |
Wall frames
|
Exterior framing 90 x 45 H1.2 treated precut and prenailed
Interior framing 70 x 45 chemical free
50 x 25 James Hardie CLD battens where required (excluded for brick exterior) |
Roof framing
|
Trusses pre cut & pre nailed including 70 x 45 purlins & 90 x 45 random bracing. |
| Ceiling battens |
70 x 35 chemical free timber battens (with random supply). |
| Building paper |
Thermakraft breathable wrap, DPC Supercourse & Aluband flashing tape. |
| Stage Two |
| Roof |
Metalcraft Colour Steel long run corrugate profile with self supporting underlay and flashings, with nails/screws. |
| Fascia & spouting |
200 x 25 timber fascia with PVC gutter with white PVC downpipes. |
| Stage Three A |
| Windows |
Aluminium joinery as per plans with double glazed windows and H3.1 treated pine jambs (window flashings as required). |
| Front door |
Grooved fibrewood with round handle and Securiturn deadlock. |
| Stage Three B |
| Exterior cladding |
James Hardie 180mm smooth weatherboard including all required jointers, moulds and scribers where required, or Monier Foundation 70 series clay brick. |
| Window heads |
James Hardie 240mm smooth weatherboard (applies to brick exterior only). |
| Soffits |
450mm x 4.5mm James Hardie Hardiflex & jointers (unless otherwise specified on plans). |
| Stage Four |
| Insulation |
Pink Batts R2.2 walls and R3.2 ceilings in the North Island unless otherwise specified.
Pink Batts
R2.8 walls and R3.6 ceilings in the South Island unless otherwise specified. |
| Interior linings |
10mm Gib plasterboard to walls
10mm Gib plasterboard to ceilings
10mm Gib Aqualine to bathroom areas
90 degree slimlines, bracing clouts and wallboard glue
(Gib board supplied for horizontal fix only unless otherwise requested) |
| Scotia & skirting |
55mm Gib Cove and 40mm No. 8 cornice to wardrobes/cupboards/garage and No. 20 60mm bevelled skirting and 40mm single bevelled architraves to windows and doors (may vary in certain areas).
Square stop to all monopitch designs. |
| Shelving |
MDF to wardrobes & 100 x 25 timber slats to hot water cupboard. |
| Interior doors |
Prehung flush doors with pine jambs and round door knobs (cushion door steps and roller catches supplied). |
| Wardrobe rails |
Lumberlock white ‘S’ shaped hanging rails. |
| Plumbing |
Dual flush toilet/s
Chrome single lever mixers
Bath spout
Chrome goose neck single lever mixer to kitchen sink
Slide shower rose and mixer to shower
180 litre Rheem mains pressure hot water cylinder |
| Vanities & bath |
Acrylic basin vanity units, acrylic bath (sizes as specified in plans), chrome wastes. |
| Shower/s |
Acrylic shower/s with safety glass pivot door and chrome wastes (sizes as specified on plans). |
| Laundry tub |
Robinhood ST3100 laundry tub. |
| Stage Five |
| Kitchen |
38mm Formica square edged bench tops and single bowl stainless steel sink insert (as per plans), Melteca prefinished carcase, Meltrim edge doors with chrome pull handles. |
| Appliances |
Westinghouse Neptune white freestanding coil element oven, Simpson 60mm freestanding dishwasher white, Simpson 60cm recirculating hood. |
| Extra |
| General |
Heavy vehicle all weather access required for deliveries
Latitude Homes sign (supplied) must be erected on site for deliveries
48 hours notice (in writing) is required to change delivery booking
Very high wind zone, sea spray zone or snow loading incurr additional costs |
| Important note: |
The following items are not included in our Kitset package
- Council Building Consent & fees, Resource Consent & fees Surveying & Engineering costs
- Concrete or timber floor (timber floor kits available, P.O.A)
- All connections / straps from floor to framing / floor fixings
- Nails, screws and glue
- Plumbers piping
- Straps, trays or valve kit for hot water cylinder
- Electrical wire or electrical fittings (i.e. power points and light switches)
- Stopping, painting or decorating material
- Garage door (if applicable as shown on plans)
- Floor coverings (carpets and tiles)
- Mirrors, tiles, toilet roll holders and towel rails
- Steps or patios
|
